ULTRADRY
Bicomponent epoxy resin
Two-component, 100% Solids content Epoxi Resin.
Ultradry is a low viscosity bicomponent epoxy resin for application in one layer.
It is specially designed to absorbe moisture in humid substrates and improve planimetry for
Ultraflex system, as in concrete, mortar or ceramic substrates with a high residual
moisture or negative pressure.
USES Ultradry has been specially developed for application in the following situations:
- Concrete, mortar or ceramic
- Substrates “Green mortar”
- Vapor barrier
Downloads
General characteristics
SPECIFICATIONS
- Aromatic two-component, 100% solids content epoxy resin, solvent-free, odourless.
- Retain the residual moisture up to 98% in supports as mortar or concrete.
- Excellent adherence in porous surfaces; concrete, mortars and ceramic tiles.
- Do not apply ULTRADRY in structural joints
PACKAGING:
15 KG pack: Component A (12 kg) + Component B (3 kg) (Metal tins) SHELF LIFE: 12 months at temperatures between 5°C to 35°C, provided it is stored in a dry place. Once the tin has been opened, the product must be used immediately.
SHELF LIFE:
12 months at temperatures between 5°C to 35°C, provided it is stored in
a dry place. Once the tin has been opened, the product must be used immediately.
HANDLING AND TRANSPORTATION:
These safety recommendations are necessary during the application process, as well as before and after, or upon exposure while loading machinery.
- Skin protection: Use rubber gloves and wash immediately after contamination. Wear clean clothes covering your entire body. Wash thoroughly with soap and water after use and before eating, drinking, or smoking. Contaminated clothing must be dry cleaned. Eyes/Face: Wear safety goggles to prevent splashing.
- Respiratory protection: When handling or spraying, use an approved air-purifying respirator.
- Waste: Waste generation should be avoided as much as possible. Incinerate under controlled conditions in accordance with local and national laws and regulations. For more information check the safety data sheet of the product.
Application Method
- The surface to be covered should be flat, firm and free from substances
which might hinder adherence: dust, lime, plaster, paint, adhesive and
any non-humidity resistance substrate. - Remove superficial water in the surface.
- ULTRADRY has been designed by combining component A and
component B. Pour the content of component B into the container of the
component A and mix well with a mechanical shaker in slow speed until
obtain a uniform color and consistency. - Apply a ULTRADRY homogeneous coat with a toothed trowel. The yield may
vary depending on the substrate condition, planimetry and/or objective of the
application. - As a moisture blocker, we recommend to apply 500 g/sqm approx., while as
an absorbant for surface moisture 200 g/sqm may sufice. You can apply by
roller in thin layers, or in one layer with a trowel or rubber lip (self-levelling
system).
News
ULTRADRY: Effective Solution Against Negative Pressure Moisture on Ground Floors
Eagle Group, a leader in innovative and sustainable waterproofing solutions, has successfully completed a project in a single-family home, solving a chronic problem of negative pressure moisture on the ground floor. Project Context The single-family home,
CoolTop: Innovation and Energy Efficiency to Combat High Temperatures
Heatwaves are intensifying, and temperatures are reaching historical records. In fact, July 2024 was the warmest month globally since records began. According to a recent report by the World Meteorological Organization (WMO), there is an 80% chance
Belgian Roof Day
On October 11, Eagle Group will once again participate in the Belgium Roof Day in Brussels. You can find us at booth 102! Meet in the spacious halls of Brussels Kart Expo from 9:00 a.m. to
