ULTRAPRIME REG
bicomponent regulating resin
Bicomponent regulating resin, 100% solids, epoxy-based.
UltraPrime REG is a bicomponent regulating resin, designed as a repair solution for mortar, concrete, ceramic supports, etc. and regularization of the surface prior to the application of our range of polyurethanes and polyureas.
UltraPrime REG UltraPrime REG is an epoxy bicomponent self-leveling resin designed to flatten and level surfaces in special conditions before the application of the Ultraflex membranes (UltraFlex, UltraFlex PRO and Ultraflex PRO HT).
Downloads
GENERAL FEATURES
UltraPrime REG has been designed by combining 2 components with an epoxy base with solid charges. Suitable to be applied with a roller to create thin layers (porosity sealing) or with a floor squeegee or a trowel to facilitate the application of thick layers (reparation of surfaces).
It can be applied on porous or non-porous surfaces. Depending on the state of the surface, irregularities, flatness, etc., its performance can vary between 200-500 g/m2. Suitable for thick layer applications. Self-leveling.
Apply on a flat, dry and firm surface. Make sure that the surface is clean of dust, grease, oil or other contaminating agents, as well as of previous treatments or damaged paint. Do not apply on wet surfaces or with seeping moisture (phreatic waters, condensation, leaks, etc.).
When dealing with extremely irregular surfaces, mineral particles (silicon dioxide) can be added to component A.
100% solids, it does not contain volatile organic compounds (VOCs). Excellent adhesion.
It holds the CE marking in combination with UltraFlex Liquid Polyurethane Waterproofing System, under the EUROPEAN guideline ETAG #005.
APPLICATION METHOD:
Pour the contents of component B into the container of component A and combine well with a mixer on low, scraping the product on the sides and at the bottom of the container until smooth.
Apply UltraPrime REG as needed, in thick layers with an approximate consumption of 300- 500 g/m2 (self-leveling application). A trowel, a floor squeegee or a roller CAN be used.
On rough surfaces, a thin sealing layer can be applied with a short pail roller (150-200 g/m2).
News
ULTRADRY: Effective Solution Against Negative Pressure Moisture on Ground Floors
Eagle Group, a leader in innovative and sustainable waterproofing solutions, has successfully completed a project in a single-family home, solving a chronic problem of negative pressure moisture on the ground floor. Project Context The single-family home,
CoolTop: Innovation and Energy Efficiency to Combat High Temperatures
Heatwaves are intensifying, and temperatures are reaching historical records. In fact, July 2024 was the warmest month globally since records began. According to a recent report by the World Meteorological Organization (WMO), there is an 80% chance
Belgian Roof Day
On October 11, Eagle Group will once again participate in the Belgium Roof Day in Brussels. You can find us at booth 102! Meet in the spacious halls of Brussels Kart Expo from 9:00 a.m. to
